5.8 GHz Video Set Transmitter and Receiver.
|
Yellowjacket Pro 5.8GHz Receiver and Stinger Pro 5.8 GHz transmitter represent the pinnacle of video transmission equipment for R/C use. Targeted at industrial, scientific and research applications, they are also affordable to the discerning hobbyist.
Why 5.8GHz? Whilst digital transmission at 2.4GHz may be forgiving of interference
video transmission is not. The 2.4GHz band is full of other users, such as WiFi networks and R/C radios. Iftrontech have taken the lead and produced their new 5.8GHz series, which work just fine alongside 2.4GHz equipment, including RC Systems from Spektrum/JR/Futaba and similar.
These receivers are DIVERSITY receivers - literally 2 independent receivers side by side with an advanced digital controller between them. The controller monitors video strength and quality from each receiver, then switches to display the best image. The switching occurs very quickly between frames and is unnoticable. This is required on high frequency radio links, especially those where the position of the transmitter changes in relation to the receiver. Look it up here on wikipedia if you are interested in the science behind it. As a result it excels in conditions where other video equipment will fail dismally.
Features:
- To help fine-tune your setup, a visible field strength meter will display the signal strength being received in real time.
- Mic input on receiver, so you can record operator commentary.
- Dual AV outputs, allowing the connection of a recorder & a monitor without extra hardware
- Wide voltage inputs on both the transmitter and the receiver, courtesy of integrated voltage regulation circuitry, including reverse voltage protection. No other video Tx on the market features this, most require 12V power.
- Automatic low voltage detection on Tx for use with LiPo batteries which cannot tolerate full discharge - settable by dip switch to 2 or 3 LiPo cells.
- Transmitter weight is 24g with antenna.
This kit includes:
1 x YellowJacket Pro 5.8 GHz Video Receiver with video leads
2 x Custom receiver antennas
1 x Stinger Pro 5.8 GHz Video Transmitter, certified 250mW output.
1 x Video and power connector leads for transmitter.
1 x Custom Transmitter Antenna
Extra Requirements:
Power supply for the Receiver (5-15VDC).
Power for the transmitter (5-15VDC).
Video input for the transmitter - a Canon digital still camera can be connected to the transmitter or select one of our micro CCD cameras as a video source.
|
Price: (USD)
$779.40
|
Shipping from:
$7.20
|
|
In stock now
|
|
|
|
|
|
|
|
|
|